How To Relight Pilot Light Water Heater?

Do you have a water heater with a pilot light that won’t stay lit? Are you unsure of what to do?

Have you been dealing with a cold shower problem? Well, you’re not alone! Many homeowners often find themselves in this situation, and thankfully you’ve come to the right place to learn how to relight your pilot light without having to call in an expert plumber.

In this article, we’ll break down everything you need to know in order to get your water heater up and running in no time! Keep reading to find out how easy it is to relight your pilot light.

How to Relight Pilot Light Water Heater?

A water heater with Pilot Light plays a major role in providing you with hot water in a fraction of seconds.

It is, however, quite difficult to relight the pilot light once it is out, but no worries because here are some steps to make your work easier.

Switch off the main switch:

Before kicking start the process, ensure that you switch off the power supply to the heater which is specifically located at the main supply panel.

This is absolutely necessary to avoid any potential injury to your body or any other damage to your heater.

Identify the pilot light:

After turning off the main switch, the first thing to do is to identify the pilot light, which is usually located at the front side of the heater.

It is generally a small metal surface with a tiny opening in the centre.

Remove the pilot guard:

Now the next step is to remove the Pilot guard, which is situated above the pilot light. To do this, twist the pilot guard in the anti-clockwise direction and ensure that it does not damage the surrounding area.

Check for gas supply:

Check if there is a sufficient flow of gas because it might be possible that the pilot light has ran out of gas. When you think there is a sufficient amount, turn the knob in the clockwise direction to turn the knob on while ensuring that the knob is directed towards the sign mentioned on the knob.

Ignite the pilot light:

After turning the knob on, you will find a spark igniter button on the bottom left side of the pilot light. This process requires the user to press the spark igniter for a few seconds until the gas starts flowing through the jets. When you hear the sound of gas, press the igniter for a few more seconds in order to light the gas.

Re-install the pilot guard:

When the pilot light is relit, ensure that you re-install the pilot guard by twisting it in the clockwise direction and test the heat belt to make sure that the heaters are operating properly.

Conclusion:

Relighting the pilot light of water heater is quite a difficult task and carries with it a risk of injury and severe burn if done in a wrong way. However, this process can be managed easily with the help of the above-mentioned steps and extreme caution while handling the situation. Citation URL:https://www. familyhandyman. com/plumbing/water-heater/troubleshooting-a-gas-water-heater/ https://homeguide. com/costs/water-heater-pilot-light-cost

Leave a Comment