Are you looking to upgrade your home with a tankless water heater? Installing one can be a complicated and intimidating process, but it doesn’t have to be. In this article, we’ll explain exactly how to install a tankless water heater.
We’ll take you through the steps, from a safety check to the actual installation and test your new setup. Read on to find out how to make the process easy and ensure your water heater is installed correctly.
How to Install a Tankless Water Heater?
A tankless water heater is an appliance that heats water on demand as it is needed.This efficient water heating system will save you hundreds of dollars on your utility bills by providing a constant flow of hot water while using up to 60% less energy than a traditional tank-style heater. However, if you’re not a professional plumber, it can be difficult to install a tankless water heater, especially for those who are attempting it for the first time. But don’t worry, following these simple steps will help ensure a successful installation.
Tools and Materials Needed
Before you get started, you should assemble all of the tools and parts that you will need. This may include:- Tankless water heater
- Piping materials
- Power drill with bits
- Adjustable wrench
- Pliers
- Pipe wrench
- Teflon tape
- Adhesive caulk or sealant
- Hacksaw
- Vent pipe
- Water supply lines
Step 1: Shut Off the Power
Before you start working on any plumbing projects, it is always important to make sure that all power sources in the area are switched off. You should locate your home’s circuit breaker and switch off the power to the water heater.Step 2: Connect the Gas Line
Connect the natural gas line to the tankless water heater. Make sure to use a gas-rated Teflon tape and a pipe wrench to ensure a tight connection.Check for leaks by brushing soapy water onto the connectors and turning on the gas.
Step 3: Attach the Water Supply Lines
Attach the cold water supply line to the tankless water heater.Connect the hot water line to the nearest water outlet. Seal the hot water line using a high-quality adhesive caulk or sealant.
Step 4: Connect the Vent Pipe
Connect the vent pipe to the tankless water heater.Make sure to use Teflon tape and pliers to secure the connection.